Differences

This shows you the differences between two versions of the page.

--- howto:bootes:bootes_ir [2008/08/27 13:14] – pkubanek
+++ howto:bootes:bootes_ir [2008/08/27 19:56] – 88.16.139.239
@@ Line 22: / Line 22: @@
 And it should reference in AZ axis.
+====== Setting dome parking position ======
+Dome park position can be set only locally on dome control box. The box has eight small buttons and five line of LCD display. First, switch box to **remote** mode by turning key clokwise. Then press simultaneusly left and right top buttons. System will enter **technical** mode, where you can change various parameters. Using right and left top buttons, move to screen 4. Using bottom buttons, move cursor to park position which is a few lines bellow initial display. Using middle two buttons, change park value.
+To save park position, so it will be remembered after power cycling of the dome control box, go to screen 18 and set **Save params** to 1.