RTS2 Wiki

User Tools

Site Tools

Trace:
skycat

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
skycat [2009/05/11 02:04] – pkubanekskycat [Unknown date] (current) – external edit (Unknown date) 127.0.0.1
Line 3: Line 3:
 This document is ment as a simple howto for installing [[http://archive.eso.org/cms/tools-documentation/skycat|ESO SkyCat Tool]] on Debian and Ubuntu systems. It surely is not comprehensive nor authoritative, it's rather the simple description of "how we did it". But it still may come in handy ;-). This document is ment as a simple howto for installing [[http://archive.eso.org/cms/tools-documentation/skycat|ESO SkyCat Tool]] on Debian and Ubuntu systems. It surely is not comprehensive nor authoritative, it's rather the simple description of "how we did it". But it still may come in handy ;-).
  
-The original version from Petr Kubanek was only for Ubuntu (08.10 and 09.04), now it's extended to Debian 4.0 Etch.+The original version from Petr Kubanek was only for Ubuntu 08.10, now it's extended to Debian 4.0 Etch, Debian 5.0 Lenny and Ubuntu 09.04.
  
 ====== Downloads ====== ====== Downloads ======
Line 25: Line 25:
 <code bash> <code bash>
 user@host:~$ wget http://archive.eso.org/cms/tools-documentation/skycat-download/skycat-3.0.2.src.tar.gz user@host:~$ wget http://archive.eso.org/cms/tools-documentation/skycat-download/skycat-3.0.2.src.tar.gz
-user@host:~$ sudo apt-get install tcl8.4-dev tk8.4-dev blt-dev itcl3-dev itk3-dev tclx8.4 iwidgets4+user@host:~$ sudo apt-get install tcl8.4-dev tk8.4-dev blt-dev itcl3-dev itk3-dev tclx8.4 iwidgets4 x11proto-xext-dev libxext-dev
 </code> </code>
  
Line 31: Line 31:
  
   * Ubuntu & Debian:   * Ubuntu & Debian:
 +If you installed tcl8.4:
 <code bash> <code bash>
 user@host:~$ tar -xzf skycat-3.0.2.src.tar.gz user@host:~$ tar -xzf skycat-3.0.2.src.tar.gz
 user@host:~$ cd skycat-3.0.2/ user@host:~$ cd skycat-3.0.2/
 user@host:~$ ./configure --with-tcl=/usr/lib/tcl8.4/ --with-tk=/usr/lib/tk8.4/ --with-tkinclude=/usr/include/tcl8.4/  --with-blt=/usr/lib user@host:~$ ./configure --with-tcl=/usr/lib/tcl8.4/ --with-tk=/usr/lib/tk8.4/ --with-tkinclude=/usr/include/tcl8.4/  --with-blt=/usr/lib
 +</code>
 +
 +If you installed tcl8.5:
 +<code bash>
 +user@host:~$ tar -xzf skycat-3.0.2.src.tar.gz
 +user@host:~$ cd skycat-3.0.2/
 +user@host:~$ ./configure --with-tcl=/usr/lib/tcl8.5/ --with-tk=/usr/lib/tk8.5/ --with-tkinclude=/usr/include/tcl8.5/  --with-blt=/usr/lib
 </code> </code>
  
Line 47: Line 55:
  
 <code> <code>
-    BLT_LIBNAME=libBLT.2.4${SHLIB_SUFFIX}.8.4+    BLT_LIBNAME=libBLT${SHLIB_SUFFIX}
     BLT_LIBFLAG=-lBLT     BLT_LIBFLAG=-lBLT
 </code> </code>
  
-in case you have ///usr/lib/libBLT.2.4.so.8.4//. If you have some different version, please use it.+Also if you installed tcl8.5, change 8.4 to 8.5 in //skycat/skycat.in//:
  
-  * Seems as case only for Ubuntu 09.04+<code bash> 
 +exec wish8.5 $SKYCAT_BASE/lib/skycat@PACKAGE_VERSION@/main.tcl ${1+"$@"} | tee -a $HOME/.skycat/log 2>&1 
 +</code> 
 + 
 +  * Seems as case only for Ubuntu and Debian 5.0 Lenny
  
 You need to edit //cat/generic/AstroQuery.h// and put //#include <string.h>// to it, right after //#include <cstdio>// You need to edit //cat/generic/AstroQuery.h// and put //#include <string.h>// to it, right after //#include <cstdio>//
Line 63: Line 75:
 </code> </code>
  
-Also edit //astrotcl/generic/ImageIO.h//, around line 307 should be:+Also edit //astrotcl/generic/ImageIO.h//, around line 307 should abs((float)bitpix_).. instead of abs( bitpix_):
  
 <code c++> <code c++>
Line 73: Line 85:
  
     // member access     // member access
 +</code>
 +
 +and in //rtd/generic/RtdImage.C// around line 915 add define for MODULE_SCOPE, so
 +
 +<code c++>
 +// Fix for Tk clipping coordinates to short range: See CanvasWindowCoordsNoClip() below.
 +#ifdef HAVE_TKCANVAS_H
 +#include "tkCanvas.h"
 +#else
 +// The structure we need hasn't changed for a long time, so just include a local copy.
 +#include "tkCanvas.h-tk8.4.11"
 +#define HAVE_TKCANVAS_H 
 +#endif
 +</code>
 +
 +becomes
 +
 +<code c++>
 +#ifndef MODULE_SCOPE
 +#define MODULE_SCOPE extern
 +#endif
 +
 +// Fix for Tk clipping coordinates to short range: See CanvasWindowCoordsNoClip() below.
 +#ifdef HAVE_TKCANVAS_H
 +#include "tkCanvas.h"
 +#else
 +// The structure we need hasn't changed for a long time, so just include a local copy.
 +#include "tkCanvas.h-tk8.4.11"
 +#define HAVE_TKCANVAS_H
 </code> </code>
  
   * Debian (seems to be not a problem in ubuntu?):   * Debian (seems to be not a problem in ubuntu?):
-There is one more problem, you have to edit these files:+There is one more problem in these files:
   ./cat/configure   ./cat/configure
   ./rtd/configure   ./rtd/configure
Line 83: Line 124:
   ./astrotcl/configure   ./astrotcl/configure
  
-There is an error in those files, you have to change the line+It is the redundant single quote mark (') in the end of the line:
   system=MP-RAS-`awk '{print }' /etc/.relid'`   system=MP-RAS-`awk '{print }' /etc/.relid'`
-to 
-  system=MP-RAS-`awk '{print }' /etc/.relid` 
-(redundant single quote mark). 
  
 +You can use this simple pipeline to repair it all:
 +<code bash>
 +for i in ./cat/configure ./rtd/configure ./tclutil/configure ./skycat/configure ./astrotcl/configure; do cp $i ${i}.orig; cat ${i}.orig | sed "s/\/etc\/\.relid'/\/etc\/.relid/" > $i; done
 +</code>
  
 ====== Make ====== ====== Make ======
Line 101: Line 143:
   * Ubuntu 09.04:   * Ubuntu 09.04:
 <code bash> <code bash>
-user@host:~$ <code bash> +user@host:~$ ./configure --with-tcl=/usr/lib/tcl8.5/ --with-tk=/usr/lib/tk8.5 --with-tkinclude=/usr/include/tcl8.5 --with-blt=/usr/lib
-user@host:~$ /configure --with-tcl=/usr/lib/tcl8.5/ --with-tk=/usr/lib/tk8.5 --with-tkinclude=/usr/include/tcl8.5 --with-blt=/usr/li+
 user@host:~$ make all user@host:~$ make all
 user@host:~$ sudo make install user@host:~$ sudo make install
skycat.1242000241.txt.gz · Last modified: 2009/05/11 00:00 (external edit)