howto:bootes:bootes_3
This is an old revision of the document!
Bootes 3 (New Zealand)
Computers
Provided by NZ (who?)
- 3 rackable units (1 telescope + dome, 1 all sky, 1 spare)
- quad CPU
- 2 deep (80cm) rack 12-16 U height
- as big HDD as you can buy (1TB for each?) in units (=RAID) and in box, so we will be able to quickly replace failed hardrives
- lot of SATA connectors, USB connectors
- at least one serial connector (Davis Meteo station), so far I did not know about any other
- 1GB (the fastest you can get) network card
- 1 UPS
- Linux Debian-based distribution (preference will most probably shift towards Ubuntu) No purchase needed
Computer setup
NZ (who?), Petr
- install Linux
- install RTS2
- test it
Network
Provided by New Zealand (who?)
Router / switch, so we can connect all to Internet
Dome installation, weather station
Petr, Florentino
- Davis weather sensor (windspeed, etc), know to work with RTS2 and http://meteo.othello.ch
- Zelio based roof control with direct rain detector connection
- rain detector connected to Zelio
UPS provided by New Zealand? Must be able to support emergency roof closing (power failure). We have same good experiences from Watcher with MGE UPS Systems UPS (http://www.mgeups.com). I suggest to call them and ask for solution - 3 PC backup, preferably rack mounted, and let them see what they will suggests.
Astrometry, image processing
Antonio, Petr (Martin remotely)
- First astrometry
- Pointing model
Travelling
Petr: 1st Feb → 2nd Feb on site 3rd Feb start working 28th leaving
Alberto:
Florentino:
Antonio:
howto/bootes/bootes_3.1228829043.txt.gz · Last modified: 2008/12/09 00:00 (external edit)