RTS2 Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

=====Prerequisites =====
  * Get {{http://rts2.org/meteo-0.9.17.tar.gz| the special version}} of {{http://meteo.othello.ch/ meteo}} and compile, install and configure it as usual. 
  * Start ''meteopoll'' with<code bash>         /sbin/startproc $METEO_POLL_BIN -l syslog:local0 -s ${station} \
                                   -f $METEO_CONFIG \
                                   -U YOUR_DESTINATION_HOST -P 5002\
                                   -b msgqueue > /dev/null 2>&1
 </code>where YOUR_DESTINATION_HOST ist the host, where ''rts2-sensor-davis'' is running.
===== Configuration ======
  * In the file usually found in ''/etc/rts2/devices'' add the line <code bash>
 sensor  davis   MET    --max-peek-windspeed 5.0  --max-avg-windspeed 3.0 --udp-port 5002</code> Configure the device name and the values appropriately. 
===== Screen shot ======
{{ howto:rts2-mon-weather.png?300|The Davis meteo station as seen with rts2-mon.}}