howto:set_up_a_pointing_model_for_opentpl_mounts
Differences
This shows you the differences between two versions of the page.
Last revisionBoth sides next revision | |||
howto:set_up_a_pointing_model_for_opentpl_mounts [2016/11/26 16:10] – created rcunniff | howto:set_up_a_pointing_model_for_opentpl_mounts [2017/03/13 07:50] – Updated; corrected rts2-opentpl-errors usage rcunniff | ||
---|---|---|---|
Line 1: | Line 1: | ||
Before starting: | Before starting: | ||
- | * Target ID 4 is for making pointing models | + | * Back up / |
- | * Make sure exposure | + | * Make sure the script for target 4 is appropriate, at least two exposures to allow astrometry to complete before the next pointing. |
- | Assuming the telescope is T0 | + | |
- | | + | To create the new model: |
- rts2-mon/ | - rts2-mon/ | ||
- | | + | * Verify |
- | | + | * Execute command |
- | - shell: | + | - shell: |
- | | + | * Track the number of points with 'rts2-opentpl-errors -I <ip> -N < |
- | | + | * After $ENOUGH points, do ' |
- | - after ~20 exposures, **run** | + | - rts2-mon/<tel>: |
- | - rts2-mon/T0: **run** | + | |
- | Repeat this above pattern again with a larger number of points (e.g. 50) to refine it. | + | Astelco suggest starting |
howto/set_up_a_pointing_model_for_opentpl_mounts.txt · Last modified: 2017/03/13 00:00 (external edit)