no way to compare when less than two revisions

Differences

This shows you the differences between two versions of the page.

@@ Line 1: / Line 1: @@
+====== Introduction ======
+This document is ment as a simple howto for installing [[http://archive.eso.org/cms/tools-documentation/skycat|ESO SkyCat Tool]] on Debian and Ubuntu systems. It surely is not comprehensive or authoritative, it's rather the simple description of "how we did it". But it still may come in handy ;-).
+The original version from Petr Kubanek was only for Ubuntu (08.10 and 09.04), now it's extended to Debian 4.0 Etch.
+====== Downloads ======
+From [[http://archive.eso.org/cms/tools-documentation/eso-skycat-download|Skycat download]] get skycat sources. As TclTk sources are included in Debian, you don't need them!
+Then install required libraries:
+  * Ubuntu:<code bash>
+user@host:~$ wget http://archive.eso.org/cms/tools-documentation/skycat-download/skycat-3.0.2.src.tar.gz
+user@host:~$ sudo apt-get install tcl8.4-dev tk8.4-dev blt-dev itcl3.1-dev itk3.1-dev tclx8.4
+</code>
+  * Debian:<code bash>
+user@host:~$ wget http://archive.eso.org/cms/tools-documentation/skycat-download/skycat-3.0.2.src.tar.gz
+user@host:~$ sudo apt-get install tcl8.4-dev tk8.4-dev blt-dev itcl3-dev itk3-dev tclx8.4 iwidgets4
+</code>
+====== Patching ======
+  * Ubuntu & Debian:
+<code bash>
+user@host:~$ tar -xzf skycat-3.0.2.src.tar.gz
+user@host:~$ cd skycat-3.0.2/
+user@host:~$ ./configure --with-tcl=/usr/lib/tcl8.4/ --with-tk=/usr/lib/tk8.4/ --with-tkinclude=/usr/include/tcl8.4/  --with-blt=/usr/lib
+</code>
+You will get error (libBLT24), which is expected. Now edit //tclutil/configure//, find **libBLT24** and replace this line:
+<code>
+    BLT_LIBNAME=libBLT24${SHLIB_SUFFIX}
+    BLT_LIBFLAG=-lBLT24
+</code>
+with
+<code>
+    BLT_LIBNAME=libBLT.2.4${SHLIB_SUFFIX}.8.4
+    BLT_LIBFLAG=-lBLT
+</code>
+in case you have ///usr/lib/libBLT.2.4.so.8.4//. If you have some different version, please use it.
+  * Debian (seems to be not a problem in ubuntu?):
+There is one more problem, you have to edit these files:
+  ./cat/configure
+  ./rtd/configure
+  ./tclutil/configure
+  ./skycat/configure
+  ./astrotcl/configure
+There is an error in those files, you have to change the line
+  system=MP-RAS-`awk '{print }' /etc/.relid'`
+to
+  system=MP-RAS-`awk '{print }' /etc/.relid`
+(redundant single quote mark).
+====== Make ======
+<code bash>
+user@host:~$ ./configure --with-tcl=/usr/lib/tcl8.4/ --with-tk=/usr/lib/tk8.4/ --with-tkinclude=/usr/include/tcl8.4/  --with-blt=/usr/lib
+user@host:~$ make all
+user@host:~$ sudo make install
+</code>
+====== Troubleshooting ======
+Please write to [[petr@iaa.es]], and attach error description.