User Tools

Site Tools


skycat

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
skycat [2009/05/11 02:04]
pkubanek
skycat [2010/03/26 00:00] (current)
Line 3: Line 3:
 This document is ment as a simple howto for installing [[http://​archive.eso.org/​cms/​tools-documentation/​skycat|ESO SkyCat Tool]] on Debian and Ubuntu systems. It surely is not comprehensive nor authoritative,​ it's rather the simple description of "how we did it". But it still may come in handy ;-). This document is ment as a simple howto for installing [[http://​archive.eso.org/​cms/​tools-documentation/​skycat|ESO SkyCat Tool]] on Debian and Ubuntu systems. It surely is not comprehensive nor authoritative,​ it's rather the simple description of "how we did it". But it still may come in handy ;-).
  
-The original version from Petr Kubanek was only for Ubuntu ​(08.10, now it's extended to Debian 4.0 Etch and Ubuntu 09.04.+The original version from Petr Kubanek was only for Ubuntu 08.10, now it's extended to Debian 4.0 Etch, Debian 5.0 Lenny and Ubuntu 09.04.
  
 ====== Downloads ====== ====== Downloads ======
Line 25: Line 25:
 <code bash> <code bash>
 user@host:​~$ wget http://​archive.eso.org/​cms/​tools-documentation/​skycat-download/​skycat-3.0.2.src.tar.gz user@host:​~$ wget http://​archive.eso.org/​cms/​tools-documentation/​skycat-download/​skycat-3.0.2.src.tar.gz
-user@host:​~$ sudo apt-get install tcl8.4-dev tk8.4-dev blt-dev itcl3-dev itk3-dev tclx8.4 iwidgets4+user@host:​~$ sudo apt-get install tcl8.4-dev tk8.4-dev blt-dev itcl3-dev itk3-dev tclx8.4 iwidgets4 ​x11proto-xext-dev libxext-dev
 </​code>​ </​code>​
  
Line 31: Line 31:
  
   * Ubuntu & Debian:   * Ubuntu & Debian:
 +If you installed tcl8.4:
 <code bash> <code bash>
 user@host:​~$ tar -xzf skycat-3.0.2.src.tar.gz user@host:​~$ tar -xzf skycat-3.0.2.src.tar.gz
 user@host:​~$ cd skycat-3.0.2/​ user@host:​~$ cd skycat-3.0.2/​
 user@host:​~$ ./configure --with-tcl=/​usr/​lib/​tcl8.4/​ --with-tk=/​usr/​lib/​tk8.4/​ --with-tkinclude=/​usr/​include/​tcl8.4/ ​ --with-blt=/​usr/​lib user@host:​~$ ./configure --with-tcl=/​usr/​lib/​tcl8.4/​ --with-tk=/​usr/​lib/​tk8.4/​ --with-tkinclude=/​usr/​include/​tcl8.4/ ​ --with-blt=/​usr/​lib
 +</​code>​
 +
 +If you installed tcl8.5:
 +<code bash>
 +user@host:​~$ tar -xzf skycat-3.0.2.src.tar.gz
 +user@host:​~$ cd skycat-3.0.2/​
 +user@host:​~$ ./configure --with-tcl=/​usr/​lib/​tcl8.5/​ --with-tk=/​usr/​lib/​tk8.5/​ --with-tkinclude=/​usr/​include/​tcl8.5/ ​ --with-blt=/​usr/​lib
 </​code>​ </​code>​
  
Line 47: Line 55:
  
 <​code>​ <​code>​
-    BLT_LIBNAME=libBLT.2.4${SHLIB_SUFFIX}.8.4+    BLT_LIBNAME=libBLT${SHLIB_SUFFIX}
     BLT_LIBFLAG=-lBLT     BLT_LIBFLAG=-lBLT
 </​code>​ </​code>​
  
-in case you have ///​usr/​lib/​libBLT.2.4.so.8.4//. If you have some different version, please use it.+Also if you installed tcl8.5, change 8.4 to 8.5 in //skycat/​skycat.in//:
  
-  ​* Seems as case only for Ubuntu ​09.04+<code bash> 
 +exec wish8.5 $SKYCAT_BASE/​lib/​skycat@PACKAGE_VERSION@/​main.tcl ${1+"​$@"​} | tee -a $HOME/​.skycat/​log 2>&​1 
 +</​code>​ 
 + 
 +  ​* Seems as case only for Ubuntu ​and Debian 5.0 Lenny
  
 You need to edit //​cat/​generic/​AstroQuery.h//​ and put //#include <​string.h>//​ to it, right after //#include <​cstdio>//​ You need to edit //​cat/​generic/​AstroQuery.h//​ and put //#include <​string.h>//​ to it, right after //#include <​cstdio>//​
Line 63: Line 75:
 </​code>​ </​code>​
  
-Also edit //​astrotcl/​generic/​ImageIO.h//,​ around line 307 should ​be:+Also edit //​astrotcl/​generic/​ImageIO.h//,​ around line 307 should ​abs((float)bitpix_).. instead of abs( bitpix_):
  
 <code c++> <code c++>
Line 73: Line 85:
  
     // member access     // member access
 +</​code>​
 +
 +and in //​rtd/​generic/​RtdImage.C//​ around line 915 add define for MODULE_SCOPE,​ so
 +
 +<code c++>
 +// Fix for Tk clipping coordinates to short range: See CanvasWindowCoordsNoClip() below.
 +#ifdef HAVE_TKCANVAS_H
 +#include "​tkCanvas.h"​
 +#else
 +// The structure we need hasn't changed for a long time, so just include a local copy.
 +#include "​tkCanvas.h-tk8.4.11"​
 +#define HAVE_TKCANVAS_H ​
 +#endif
 +</​code>​
 +
 +becomes
 +
 +<code c++>
 +#ifndef MODULE_SCOPE
 +#define MODULE_SCOPE extern
 +#endif
 +
 +// Fix for Tk clipping coordinates to short range: See CanvasWindowCoordsNoClip() below.
 +#ifdef HAVE_TKCANVAS_H
 +#include "​tkCanvas.h"​
 +#else
 +// The structure we need hasn't changed for a long time, so just include a local copy.
 +#include "​tkCanvas.h-tk8.4.11"​
 +#define HAVE_TKCANVAS_H
 </​code>​ </​code>​
  
   * Debian (seems to be not a problem in ubuntu?):   * Debian (seems to be not a problem in ubuntu?):
-There is one more problem, you have to edit these files:+There is one more problem ​in these files:
   ./​cat/​configure   ./​cat/​configure
   ./​rtd/​configure   ./​rtd/​configure
Line 83: Line 124:
   ./​astrotcl/​configure   ./​astrotcl/​configure
  
-There is an error in those files, you have to change ​the line+It is the redundant single quote mark ('​) ​in the end of the line:
   system=MP-RAS-`awk '​{print }' /​etc/​.relid'​`   system=MP-RAS-`awk '​{print }' /​etc/​.relid'​`
-to 
-  system=MP-RAS-`awk '​{print }' /​etc/​.relid` 
-(redundant single quote mark). 
  
 +You can use this simple pipeline to repair it all:
 +<code bash>
 +for i in ./​cat/​configure ./​rtd/​configure ./​tclutil/​configure ./​skycat/​configure ./​astrotcl/​configure;​ do cp $i ${i}.orig; cat ${i}.orig | sed "​s/​\/​etc\/​\.relid'/​\/​etc\/​.relid/"​ > $i; done
 +</​code>​
  
 ====== Make ====== ====== Make ======
Line 101: Line 143:
   * Ubuntu 09.04:   * Ubuntu 09.04:
 <code bash> <code bash>
-user@host:​~$ ​<code bash> +user@host:​~$ ​./configure --with-tcl=/​usr/​lib/​tcl8.5/​ --with-tk=/​usr/​lib/​tk8.5 --with-tkinclude=/​usr/​include/​tcl8.5 --with-blt=/​usr/​lib
-user@host:​~$ ​/configure --with-tcl=/​usr/​lib/​tcl8.5/​ --with-tk=/​usr/​lib/​tk8.5 --with-tkinclude=/​usr/​include/​tcl8.5 --with-blt=/​usr/​li+
 user@host:​~$ make all user@host:​~$ make all
 user@host:​~$ sudo make install user@host:​~$ sudo make install
skycat.1242000265.txt.gz · Last modified: 2009/05/11 00:00 (external edit)